Flutes are commonly adjusted with C, D, E, F, G. G, F tuning flute body is short, and the distance between the holes is relatively close. It is suitable for younger children or small fingers.
Some elderly beginners can choose to use E and D to use it. E and D tune flutes are short and the distance between the holes is appropriate. There are more music for practice, the sound is close to human voice and widely used.
Flutes are commonly adjusted with C, D, E, F, G. From the appearance, they become smaller and thinner in turn. Because different tone flutes have different characteristics, they are suitable for different people to choose.
1. Children with small fingers or small fingers generally recommend the use of F and G flute. This type of flute has a short body, and the distance between the holes is relatively close, which is convenient to press the hole.
2. Some beginners who are slightly older can choose D and E -tune. D. E -tune flute is short and the distance between the holes is appropriate. There are more music for practice, the sound is close to human voice and widely used. Among them, D tuneing is relatively long, and the distance between the holes is relatively long, and it is more suitable for people over 20 years of age as beginners as beginners.
3. Beginners generally do not recommend the use of C flute. Because C has the largest internal space, the most breath that can be stored. If the breath played is not enough to come out through the sound hole, then the sound is not blew.
4, C, D, E are tuned into curved flutes, which are longer and thicker, and they have higher requirements for the breath; F, G is tuned into a flute, the flute body is shorter and thinner, and it is easy to sound.
1. Look at bamboo quality. The flute tube requires the bamboo quality to be solid (bamboo pattern old), and the bamboo pattern is fine; the tube is straight and round, the thickness is moderate, the head is slightly thicker than the tail, but the difference should not be too large; Waiting for phenomenon. When choosing the appearance, although it cannot be judged by the appearance of the flute, the flute with charm is definitely a enjoyment when performing on stage.
2. Listening. Listen to whether the treble is clear, whether the bass is thick, whether the middle sound is gorgeous, and whether the gas is better. The general requirements of flute sounds are loose, thick, round, and bright. These not only depend on the quality of the flute itself, but also have a close relationship with the technique and performance skills of the film.
3. Listening. Generally, you can compare the test blowing according to the standard sound flute or fixing musical instrument (such as Sheng, accordion, wind piano, etc.), and you can also blow various pan -sounds to see if it is easy to make sound and whether the sound is clean.
4. Hear the speed of sound. Generally speaking, it is better to use qi to sound and pronunciation.
1. First, close the lips naturally, hold the two ends of the flute with both hands, hold the flute head tightly with your left hand, hold the tail of the flute with your right hand, and then place the lower edge of the lips, and then align the blowhole to blow the air.
2. When the breath is rushing out, just make a little gap to make the breath pass, make it a bouquet of gas columns, and blow it out under the blowhole. This principle is like blowing the pen cover.
3. In order to avoid rushing your two lips when the breath is rushed out, and the breath is dispelled, the muscles of the cheeks need to be effort, and the exit of the breath is very small.
4. Avoid the sound of miscellaneous gas when playing the flute, so as to keep the sound pure.
5. Practice more in the mirror daily, and realize how to align the pores to make the pronunciation position accurately, and finally turn the breath into a flute sound.
In summary, after the above introduction of what tuning the flute selection is, I believe that everyone will have a new understanding of what the flute selection is better, and I hope it can help you.