Daily learning of dulcimer, how to tune correctly when using dulcimer is inaccurate, today I will teach you how to tune dulcimer, so that you can easily learn to tune.

First, the left hand uses the tail of the bamboo to pluck the strings up and down, and the right hand uses a wrench to turn the pegs to tune the pitch on one saddle to the same level.

Turning left raises the note, turning right lowers it.

When tuning steel strings, generally tune the tone on the left side of the bridge first, and then tune the tone on the right side of the bridge. When the interval relationship is inaccurate, you can use the method of moving the ball to make fine adjustments. The direction and force of rotation when tuning is also important.

When the wrench is inserted into the peg, it needs to be stable and vertical. When rotating, the force should be even and slow, and the action should not be too fast or too violent, otherwise the peg will be loose, the strings will easily run, and the piano cannot be tuned.

Therefore, the correct tuning method is an important guarantee of intonation.

The dulcimer can play different tunes as long as the tone of the whole qin is calibrated once. For example, the treble 1 in the key of C is the mid-tone 4 in the key of G. When tuning, use a suitable tuner, adjust the tuner to 440hz and start tuning based on the scale of C. The pointer to the left indicates the low pitch, to the right is the pitch, and the green light in the middle is accurate.